【摘 要】
：
A new environmental friend cutting brass containing magnesium instead of lead was produced by casting, extruding and drawing. Its microstructure was observed an
【机 构】
：
State Key Laboratory of Powder Metallurgy,School of Materials Science and Engineering
论文部分内容阅读
A new environmental friend cutting brass containing magnesium instead of lead was produced by casting, extruding and drawing. Its microstructure was observed and its mechanical, chemical and cutting properties were stutied. The results show that the global secondary particles which are brittle and soft intermetallics, distribute in grains and on grain boundries, which is helpful for improvement of cutting ability of the brass. The tensile strength, yield strength, elongation and area reduction of halfhard magnesium-brass are 550MPa, 280MPa, 16.30%, 32.4%, respectively. The cutting ability of magnesium-brass corresponds to that of lead-brass C3604 judged by the size and appearance of chips of alloy and by the cutting force. The magnesium-brass has excellent corrosion resistance.
其他文献
CaSnO3 with the perovskite structure was prepared by wet-chemical route and the electrochemical properties as anode material for lithium ion batteries were stud
In the present paper, a numerical modeling was developed to simulate the growth kinetics of ferrite transformed from austenite in Fe-C-∑X (X denotes substituti
The effect of Cu addition on the spinodal decomposition of the Al-Zn alloy with symmetrical compositions has been investigated by X-ray diffraction analysis. It
There exists an inherent difficulty in the original algorithm for the construction of Dwarf, which prevents it from constructing true Dwarfs. We explained when
Au/Co3O4-CeO2 mixed-oxide catalysts were shown experimentally to be highly active and selective for the oxidation of CO in hydrogen-rich mixture. Activity was m
The microstructure characteristic and formation mechanism of the crackfree and ablation-resistant TaC coating deposited on the C/C composite by Chemical Vapour
Effects of matrix properties on the actuation characteristics of embedded shape memory alloy wires were studied. The coefficient of thermal expansion and the mo
The stable colloidal antimony pentoxide was prepared by oxidation of the mixture of Sb2O3 and Sb2O5 obtained from arsenic-alkali residue by hydrometallurgical p
Pneumatic driven system is widely used in industrial automation, mainly for relatively simple tasks with open-loop control. Because of the pneumatic systems com
Cu/CeO2-ZrO2 catalysts for water-gas shift (WGS) reaction were prepared with co-precipitation method, and the influence of ZrO2 content on the catalytic structu