论文部分内容阅读
施胶机一般分为水平式和斜列式两种形式,气动加压。斜列布置结构时,有一对施胶辊沿水平方向倾斜30°排列构成;烘缸组引来的纸页进入两个施胶辊组成的施胶槽进行表面施胶,然后进入下组烘缸干燥。现有技术中,机座上设置机架,机架上设置有两个施胶辊:一为镀铬辊或人造石(大理石)辊,称为上辊;一为施胶专用橡胶辊。上辊固定,橡胶辊侧向上加压,加压形式为气动,采用双曲气胎装置。两个施胶辊的两端通过轴承与机架间轴联接。传动分为:单点传动
Sizing machines are generally divided into horizontal and oblique type two forms, pneumatic pressure. Oblique arrangement of the structure, there is a pair of sizing roller along the horizontal direction of the inclined 30 ° arranged; dryer paper group into the paper into the two sizing roller sizing tank surface sizing, and then into the next set of dryer dry. In the prior art, a frame is arranged on the base, and two sizing rollers are arranged on the frame: one is a chrome-plated roll or an artificial stone (marble) roll, which is called an upper roll; and a special rubber roll for sizing. The upper roller is fixed, the rubber roller is pressed upwards, the pressurized form is pneumatic, the hyperbolic pneumatic tire device is used. Both ends of the two sizing rollers are coupled to the frame through a bearing. Transmission is divided into: a single point of transmission