论文部分内容阅读
φ690×350毫米对辊碎矿机我们已使用了七、八年,調整滑軌严重磨損。一般磨损0.8～1.2毫米,深2～3毫米的刻槽为总面积的75～80％。原来的油槽已无法辨认。对辊机底座重量約二吨,外形尺寸2200×1220×630毫米;两滑軌面长1020毫米,宽200毫米,两滑軌相距970毫米。装在底座上的調节辊座重量約550公斤,外形尺寸为1030×705×520毫米。与底座配合的滑軌长度为705毫米。需要用較大机床才能加工。我們因加工設备限制,无法加工。
φ690 × 350 mm roller crusher we have used seven or eight years to adjust the rail serious wear and tear. General wear 0.8 to 1.2 mm, 2 to 3 mm deep groove for the total area of 75 to 80%. The original tank is unrecognizable. The weight of the base of the roller is about two tons, dimensions are 2200 × 1220 × 630 mm; the two sliding rails are 1020 mm long and 200 mm wide, and the two sliding rails are 970 mm apart. Adjustment roller base mounted on the weight of about 550 kg, dimensions of 1030 × 705 × 520 mm. The length of the slide with the base is 705 mm. Need to use a larger machine to processing. We are unable to process due to processing equipment restrictions.