In order to simplify the structure of the cold end of the pulse tube refrigerator (PTR) and have a better utilization of the cold energy of the system, a one-stage four-valve pulse tube refrigerator (FVPTR) with an "L" type pulse tube structure and two orifice valves at the hot end of pulse tube has been constructed. Verification experiments show that the two orifice valve structure performs better than one orifice valve structure. A lowest temperature of 67.5 K was obtained at a frequency of 2.5 Hz under a system average pressure of 1.5 MPa with 200 mesh bronze screens as regenerator material, 80 mesh copper screens as stuffing material of heat exchanger. Due to the difficulty in manufacturing the thin "L" type pulse tube, the wall thickness of the pulse tube in the experiment was relatively difficult for us to reach 0.5 mm as that of the ordinary pulse tube, which resulted in relatively big system loss and affected the minimum temperature of the system to some degree.