论文部分内容阅读
本文通过对荣华二采区10<
Agent Modeling of User Preferences Based on Fuzzy Classified ANNs in Automated Negotiation
【摘 要】
：
本文通过对荣华二采区10
【机 构】
：
Glorious Sun School ofBusiness and Management, Donghua University, Shanghai 200051,China
【出 处】
：
东华大学学报（英文版）
【发表日期】
：
2011年1期
其他文献
Improvement of corrosion resistance in NaOH solution and glass forming ability of as-cast Mg-based b
The influences of the addition of Ag on the glass forming ability(GFA)and corrosion behavior were investigated in the Mg-Ni-based alloy system by X-ray diffract
Cayley graphs have many good properties as models of communication networks. This study analyzes the reliability of the Cayley graph based on the dihedral graph
Metal active gas (MAG)welding has been carried out on microalloy controlled rolling steel (S355J2W)by two kinds of welding wires with different Ti content.The m
Spot weld models are widely used in finite element analysis(FEA) of automotive body in white(BIW) to predict static,dynamic, durability and other characteristic
The performance of OFDM systems may be degraded when intersymbol interference (ISI) chan- nels have spectral nulls. Recently, the precoded OFDM was proposed to
Cross-modal integration processes are essential for service robots to reliably perceive relevant parts of the partially known unstructured environment. We demon
An English speech recognition system was implemented on a chip, called speech system-on-chip (SoC). The SoC included an application specific integrated circuit
Numerical analysis of joint temperature evolution during friction stir welding based on plastic defo
3D numerical model for friction stir welding (FSW)was developed by using ABAQUS software considering the plastic deformation heat.Effects of the rotation and we
To improve welding quality,a method of proportional-integral-differential (PID)parameters tuning based on pulsed gas metal arc welding (P-GMAW)control was put f
Wavelet Neural Network Based on NARMA-L2 Model for Prediction of Thermal Characteristics in a Feed S
Research of thermal characteristics has been a key issue in the development of high-speed feed system. Most of the work carried out thus far is based on the pri