【摘 要】
:
The Ni-B-Oδ and Ni-B-Zr-Oδcatalysts were prepared by the method of chemical reduction, and the deep removal of CO by selective methana-tion from the reformed
【机 构】
:
School of Chemistry and Chemical Engineering,College of Science
【基金项目】
:
广东省自然科学基金;国家自然科学基金
论文部分内容阅读
The Ni-B-Oδ and Ni-B-Zr-Oδcatalysts were prepared by the method of chemical reduction, and the deep removal of CO by selective methana-tion from the reformed fuels was performed over the as-prepared catalysts. The results showed that zirconium strongly influenced the activity and selectivity of the Ni-B-Zr-Oδ catalysts. Over the Ni-B-Oδ catalyst, the highest CO conversion obtained was only 24.32% under the experi-mental conditions studied. However, over the Ni-B-Zr-Oδ catalysts, the CO methanation conversion was higher than 90% when the temperature was increased to 220℃. Additionally, it was found that the Ni/B mole ratio also affected the performance of the Ni-B-Zr-Oδ catalysts. With the increase of the Ni/B mole ratio from 1.8 to 2.2, the CO methanation activity of the catalyst was improved. But when the Ni/B mole ratio was higher than 2.2, the performance of the catalyst for CO selective methanation decreased instead. Among all the catalysts, the Ni29B13Zr58Oδcatalyst investigated here exhibited the highest catalytic performance for the CO selective methanation, which was capable of reducing the CO outlet concentration to less than 40 ppm from the feed gases stream in the temperature range of 230-250℃, while the CO2 conversion was kept below 8% all along. Characterization of the Ni-B-Oδ and Ni-B-Zr-Oδ catalysts was provided by XRD, SEM, DSC, and XPS.
其他文献
The equilibrium lattice parameter, relative volume V/Vo, elastic constants Cij, and bulk modulus of titanium nitride are successfully obtained using the ab init
The execution of composite Web services with WS-BPEL relies on externally autonomous Web services. This implies the need to constantly monitor the running behav
A new strategy for elastic modulus adjustment is proposed based on the element bearing ratio (EBR), and the elastic modulus reduction method (EMRM) is proposed
Semiclassical limit to the solution of transient bipolar quantum drift-diffusion model in semiconductor simulation is discussed. It is proved that the semiclass
Measurements were performed using Particle Image Velocimetry (PIV) to analyze the modification of flow by the combined effects of the rotation and the Reynolds
In this article, five kinds of silicon-containing steel sheets have been electrodeposited, and then immersed in a pure molten zinc bath at 450 ℃ for various pe
The anionic products from the reactions between metal(M=Ag,Au,Pd,Pt,Pb and Bi) vapour produced by laser ablation and hexafluorobenzene seeded in carrier gas(Ar)
In order to study stability control methods for a deep gate group under complex stresses, we conducted field investiga-tions and analyses of reasons for damage
This paper addresses the use of different slotted pores in rotating membrane emulsification technology.Pores of square and rectangular shapes were studied to un
Computational fluid dynamics (CFD) modeling of the complex processes that occur within the burner of a gas turbine engine has become a critical step in the desi