【摘 要】
：
The effect of the information delay, which was caused by the nature of the distance sensors and wireless communication systems, on the string stability of plato
【机 构】
：
School of Transportation Science and Engineering,Defective Product Administrative Center
论文部分内容阅读
The effect of the information delay, which was caused by the nature of the distance sensors and wireless communication systems, on the string stability of platoon of automated vehicles was studied. The longitudinal vehicle dynamics model was built by taking the information delay into consideration, and three typical information frameworks, i.e., leader-predecessor framework (LPF), multiple-predecessors framework (MPF) and predecessor-successor framework (PSF), were defined and their related spacing error dynamics models in frequency domain were proposed. The string stability of platoon of automated vehicles was analyzed for the LPF, MPF and PSF, respectively. Meanwhile, the related sufficient string stable conditions were also obtained. The results demonstrate that the string stability can be guaranteed for the LPF and PSF with considering the information delay, but the ranges of the control gains of the control laws are smaller than those without considering the information delay. For the MPF, the "weak" string stability, which can be guaranteed without considering the information delay, cannot be obtained with considering the information delay. The comparative simulations further demonstrate that the LPF shows better string stability, but the PSF shows better string scalable performance.
其他文献
In this work,a model of gas leakage through nonmetallic gaskets was developed in order to predict leakage rate of gasket sealing connections. The model was veri
A feature extraction and fusion algorithm was constructed by combining principal component analysis (PCA) and linear discriminant analysis (LDA) to dctect a fau
To solve the seam tracking problem of mobile welding robot, a new controller based on the dynamics of mobile welding robot was designed using the method of back
V-type ultrasonic linear motor fabricated using a simple punching technique was proposed to utilize as an actuator of small precision machine. The stator of the
A reconstruction technology of finite element meshes based on reversal engineering was applied to solve mesh penetration and separation in the finite element si
In worldwide, the most common triggering factor of rock landslides is extended and intense rainfall. However, different from the soil slope failure caused by so
A novel maglev transportation system was proposed for large travel range ultra precision motion. The system consists of a levitation subsystem and a propulsion
A new coarse-grained differentiated least interference routing algorithm (CDLI) with DiffServ-Aware was presented. This algorithm is composed of off-line and on
The effect of pulsed gas metal arc welding(GMAW)variables on the dilution and weld bead geometry in cladding X65 pipeline steel with 316L stainless steel was st