倾斜基体对激光熔覆能量分布的影响研究

来源 :应用激光 | 被引量 : 0次 | 上传用户:lbwang2009
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
为了探究倾斜基体激光熔覆中基体表面能量的分布规律,利用米氏散射理论法建立了倾斜基体表面上的激光功率密度分布的数学模型,以及激光功率密度峰值和峰值偏移量的数学模型。结果表明,随着倾斜角度的增加,激光功率密度会逐渐减小,并且减小幅度逐渐增大;激光功率密度峰值会发生偏移,偏移量也随着倾斜角度的增加而增加,且幅度逐渐增大。用试验对模拟结果进行验证,获得的规律是一致的。 In order to investigate the distribution of matrix surface energy in tilted matrix laser cladding, a mathematical model of laser power density distribution on inclined substrate surface and a mathematical model of laser power density peak and peak offset were established by Mie scattering theory. The results show that with the increase of tilt angle, the laser power density will decrease gradually and the decreasing amplitude will increase gradually. The peak of laser power density will shift and the offset will increase with the increase of tilt angle, and the amplitude Increasingly. The results of the simulation with the test to verify the law is consistent.
其他文献
采用5183焊丝作为填充材料,对3 mm厚的5083铝合金对接接头进行光纤激光填丝焊接实验.分析了离焦量、焊接速度、送丝速度和激光功率对焊缝成型及强度的影响,并对最优焊缝进行
铁路罐车作为石油与化工产品的主要载运工具和计量器具,GB/T 5600-2018《铁路货车通用技术条件》等技术文件对其制造偏差进行了约束.运用三维激光技术复现罐体内部结构;运用L
利用半导体激光器在45~#钢表面制备Fe-36Ni因瓦合金熔覆层,采用光学显微镜(OM)、X射线衍射(XRD)及能谱(EDS)对熔覆层的显微微组织进行分析。利用显微硬度计和磨损试验机以及