Ti-6Al-4V compacts were fabricated by metal injection molding(MIM). Influence of vacuum sintering time on mechanical properties and microstructure of the sinter
The range of miscibility gap above 300 ℃ at low Cu side in Al-Cu-Zn ternary system was obtained by EPMA of the designed alloys and diffusion-couples treated fo
The application of a combined finite-discrete element modeling approach to simulate the three-dimensional microscopic compaction behavior of single-layer metal
By investigating the thermal expansion properties of three quasicrystalline alloys Al65 Cu20 Cr15 quenched,Al65Cu20Cr15 cast and Al65Cu20Fe15 cast particles rei
The heap leaching of oxide copper ores with copper cathode recovery by solvent extraction and electrowinning is now well established as a low-cost method of cop
The calcium phosphate cement (α-TCP/TTCP) was reinforced with oxidation-treated carbon fibers. The effect of aspect ratio and content of carbon fiber on the co
The research is based on the double difference observations and semi-parametric model. Systematic errors are considered as the parameters to be estimated, and brought into the GPS observation equation