侧吹转炉炼钢法在中国有很广泛的发展,许多工厂在最近几年来获得了相当大的成就。然而,如果对这种炼钢法的缺点估计不足,也是不正确的。按照我们的意见,这些缺点主要是:(1)技术经济指标较低,因此钢的成本较高;(2)钢的质量较差;(3)转炉钢的品种非常有限。消除这些缺点可以显著地改进转炉钢的生产效果,因此,采取消除这些缺点的措施就是转炉炼钢工作者的重要任务。本文只准备就转炉的热工作、吹炼工艺过程和转炉钢中夹杂生成的条件等三个问题,来谈一谈我对上 Side-blown converter steelmaking method in China has a very wide range of development, many factories have achieved considerable success in recent years. However, it is not correct to underestimate the shortcomings of this method. According to our opinion, these shortcomings are mainly: (1) lower technical and economic indicators, so the cost of steel is higher; (2) the quality of steel is poor; and (3) the varieties of converter steel are very limited. Eliminating these shortcomings can significantly improve the production of converter steel, and therefore, the measures taken to eliminate these shortcomings are an important task for converter steelmakers. This article is only prepared on the converter’s hot work, blowing process and converter steel in the formation of inclusions and other three issues, to talk about my right