做好医用Ｘ射线机的防护,是减少放射工作人员及受检者受照剂量的主要措施。我们结合本院实际条件制造的简易医用Ｘ射线机防护房及防护监测结果报告如下。1　防护房的制造与监测方法11　防护房的制造　防护房前、后、左、右用25ｃｍ的砖砌墙,墙两面各有2ｃｍ厚的水泥层。前面有8 Doing a good job of medical X-ray machine protection is the main measure to reduce the radiation dose to radiation workers and subjects. The report on the protective room and protection monitoring results of the simple medical X-ray machine manufactured in conjunction with the actual conditions of our hospital is reported below. 1 Manufacturing and Monitoring Methods for Protective Rooms 11 Manufacturing of Protective Rooms A 25cm brick wall is used for the front, rear, left and right sides of the protection room, and each side has a 2cm thick cement layer on both sides. There are 8 in front