【摘 要】
:
Hyaluronic acid (HA) concentration is an important parameter in fermentation process. Currently, carbazole assay is widely used for HA content determination in routine analysis. However, this method is time-consuming, environment polluting and has the ris
【机 构】
:
SchoolofPharmaceuticalSciencesShandongUniversityandNationalGlycoengineeringResearchCenterWenhuaxiRoa
【出 处】
:
JournalofInnovativeOpticalHealthSciences
论文部分内容阅读
Hyaluronic acid (HA) concentration is an important parameter in fermentation process. Currently, carbazole assay is widely used for HA content determination in routine analysis. However, this method is time-consuming, environment polluting and has the risk of microbial contamination, as well as the results lag behind fermentation process. This paper attempted the feasibility to predict the concentration of HA in fermentation broth by using near infrared (NIR) spectroscopy in transmission mode. In this work, a total of 56 samples of fermentation broth from 7 batches were analyzed, which contained HA in the range of 2.35–9.69 g/L. Different data preprocessing methods were applied to construct calibration models. The final optimal model was obtained with first derivative using Savitzky–Golay smoothing (9 points window, second-order polynomial) and partial least squares (PLS) regression with leave-one-block-out cross validation. The correlation coefficient and Root Mean Square Error of prediction set is 0.98 and 0.43 g/L, respectively, which show the possibility of NIR as a rapid method for microanalysis and to be a promising tool for a rapid assay in HA fermentation.
其他文献
激光器就其实质来说,是将某种形式的能量转化为受激光发射的换能装置。视激光工作物质体系及能量转化过程的矛盾特殊性的不同,在激光工作物质的研究方面,分别形成若干学术领域。化学激光便是其中的一个新的分支。
碳化硅陶瓷基复合材料(CMC-SiC)具有密度低、强度高、耐高温、抗腐蚀等优点,在航空航天领域具有广泛的应用潜力。但是CMC-SiC属于具有超高硬度且各向异性的难加工材料,常规加工技术难以胜任这种新型材料的优质高效加工。激光加工凭借加工质量高、非接触加工、输入热量低、适用范围广、易于和数控技术结合实现自动化等优势,有望成为CMC-SiC材质构件精密制造的主流技术。本文从CMC-SiC与激光的相互作用机理出发,分析了激光加工CMC-SiC中出现的典型热致缺陷,阐述了超短脉冲激光在CMC-SiC精密加工中展现
提出一种新颖的多层衍射元件(MLDOE),由具有不同折射率和色散性质的光学材料构成,第一层和最后一层为高折射率低色散和低折射率高色散光学材料的组合,中间填充层为阿贝数较小的光学塑料。此MLDOE在最大光束全视场角为110°情况下,设计波段内的各个波长的衍射效率高达90%以上,可有效提高折衍混合光学系统的能量利用率,提高成像质量。
为了实现中空型平板波导小型红外光谱仪光谱数据的定量化,在分析实验室常用波长定标方法的基础上,搭建了一种基于CO2激光器 积分球的波长定标装置。该装置的光谱定标范围宽,且具有较高的分辨率,克服了传统实验室定标方法的缺点,提高了定标精度。首先介绍了中空型平板波导红外光谱仪的工作原理,接着利用该定标装置对光谱仪进行波长定标,然后采用多项式拟合算法完成定标数据的分析,最后通过对两片窄带滤光片的测量完成定标结果的验证。实验结果表明:采用CO2激光器 积分球组合的方式得到的
对高功率GaAs/GaAlAs量子阱激光器(808 nm)的低频(100 Hz~20 kHz)电流调制特性进行了实验研究,测量了激光输出功率、接通延迟时间、阈值电流、正脉冲的占空比等与调制频率和调制电流的关系。
用量子主方程理论研究了量子点腔耦合系统。为了说明理论模型,分析了一个量子点微柱腔强耦合(SC)实验。经研究发现耦合系统在稳态时抽运产生一个新的强耦合标准,抽运可以抑制或者增强强耦合;腔发射谱双峰结构并不是强耦合的明确特征,它还依赖于非相干抽运。研究表明,强耦合经常出现变相的单峰而弱耦合(WC)出现双峰结构与系统所控制的参数值密切相关。激子抽运增加时,腔发射谱由双峰逐渐变成增宽的单峰最后变成窄的单峰;腔衰减率增加时,均为双峰结构的腔发射光谱经历了从强耦合到弱耦合的转变。量子点腔失谐系统有效耦合强度与非相干抽
We experimentally demonstrate a high-speed phosphorescent white light emitting diode (LED) visible light communication (VLC) system without utilizing an optical blue filter. Here, the white light response is equalized by using the proposed analog equalize