【摘 要】
：
The bovine hydroxyapatite (BHA) was applied to prepare biological tissue engineering scaffolds by the method of extrusion freeforming.To achieve this goal,BHA were added to sodium alginate (SA) solution to form a slurry system in appropriate proportion.Th
【机 构】
：
College of Materials Science and Engineering, Huazhong University of Science and Technology, Wuhan 4
【出 处】
：
武汉理工大学学报（材料科学版）（英文版）
论文部分内容阅读
The bovine hydroxyapatite (BHA) was applied to prepare biological tissue engineering scaffolds by the method of extrusion freeforming.To achieve this goal,BHA were added to sodium alginate (SA) solution to form a slurry system in appropriate proportion.The resulting mixtures were fabricated to be a kind of controllable and porous scaffolds followed with cross-linking in 5％ calcium chloride (CaCl2)solution for 24 h.After that,the scaffolds were sintered in air at 1 000,1 100,1 200 and 1 300 ℃ for 5 h.Scanning electron microscopy (SEM) and X-ray diffraction (XRD) studies were performed on the scaffolds to analyze its microstructure and constituent.To explore the effect of sintering temperature on scaffolds,the compressive strength,volume shrinkage and water absorptivity of BHA-SA composite scaffolds after sintering were investigated.The research tests indicated the feasibility of applying BHA powder to 3D printing.Besides,the scaffolds sintered in a respectively lower temperature possess much more pores and performed higher water absorptivity,which means better cellular affinity.And scaffolds sintered between 1 100 and 1 200 ℃ presents higher compressive strength.
其他文献
Polyethyleneimine (PEI) functionalized Fe3O4 MNPs were synthesized by a modified hypothermal oxidative hydrolysis method.The magnetic nanoparticles showed positively charged surface,strong magnetic responsivity and uniform particle size distribution at 56
Three CrN coatings were deposited on the Inconel X750 through the metal vapor vacuum arc ion implantation and the magnetic filtered cathodic vacuum arc deposition system (MEVVA-FCVA) with the N2 flow rates of 10,50,and 100 sccm,respectively.The surface mo
To investigate the transport characteristics of chloride ions in cement-based materials, the Mori-Tanaka (M-T) prediction scheme of the effective diffusion coefficient in composites containing single-phase and multi-phase inclusions is systematically dedu
Transparent hydroxyapatite (HAp) ceramics with the grain size ranging 86-1 300 nm were successfully synthesized by spark plasma sintering (SPS) at 925-1 200 ℃.All the sample achieved final density higher than 99.7％.The phase stability was identified by X-
To promote the stability and efficiency, quadruple-cation perovskite system (blending of MA, FA, Cs, I, Br, etc) was introduced to substitute the traditional MAPbI3 perovskite. Perovskite films degraded by water can be recovered by a simple method. The Pb
The present study aimed to improve the pervaporation (PV) performances of polydimethy-lsiloxane (PDMS) membranes by using special cross-linkers. The γ-methacryloxypropyl trimethoxy silane (KH-570) cross-linked PDMS membranes were fabricated and characteri
Based on the mechanical properties and microstructure of polyurethane foam solidified material, a two-dimensional model of polyurethane foam solidified material was constructed. Polyurethane foam was obtained by fully and uniformly mixing the two componen
A citrate-assisted hydrothermal method was utilized for the preparation of Sr-substituted hydroxyapatite (HA) nanoparticles. The influences of Sr-substituting degree on the phase identifications, microstructures and colloidal stability of the resultant pr
Fly ash (FA) was utilized to hydrothermally synthesize FA based Al-substituted tobermorites, and was combined with raw materials of FA and municipal solid waste incineration fly ash (MSWI) to hydrothermally synthesize FA-MSWI based Al-substituted tobermor
In order to reflect truly the damage evolution mechanism of weak muddy intercalation in dry-wet cycles, two typical weak muddy intercalations were selected for dry-wet cycles. The mineral changes of specimens were analyzed via X-ray diffraction after dry-