评价软氮化处理的工件的办法,是测定氮化深度(全部氮化层和化合物的深度和质量)或是测定表面硬度和氮化深度。除盐浴的成分和质量外,对于这些数值影响最大的是处理时间和钢的成分。1.化合物层的厚度和形成软氮化处理的零件的氮化层的外层,即化合物层,通过轻微地浸蚀,以其它组织为背景能够清晰可见。该层除含碳之外,含有在正常条件下产生的7～9%的氮并具有 The method of evaluating nitrocarburized parts is to determine the nitriding depth (depth and mass of all nitrided layers and compounds) or to determine the surface hardness and nitriding depth. In addition to the composition and quality of the salt bath, the most significant contributors to these values ​​are the processing time and the composition of the steel. 1. The thickness of the compound layer and the outer layer of the nitrided layer forming the nitrocarburized part, the compound layer, can be clearly seen on the other tissues by gentle etching. This layer contains, in addition to carbon, 7 to 9% of nitrogen produced under normal conditions