论文部分内容阅读
我厂是生产AK-10起动机的。在加工曲轴箱的组合机床上,设计了偏心轮拨动压板的夹具(见图)。经过一年多生产使用,这种夹具可以省掉装卸工件时移动压板及松紧压板螺母6的辅助时间。本夹具和一般的偏心夹具一样,也是利用偏心来夹紧工件的,不同的是在偏心轮28侧面装有拨销27,销子拨动调整块26,使轴14左右移动,带
I plant is the production of AK-10 starter. On the combined machine tool for machining the crankcase, a jig for the eccentrically-driven platen was designed (see photo). After more than one year of production, this kind of clamp can save the auxiliary time of moving the pressure plate and loosening the pressure plate nut 6 when loading and unloading the workpieces. The fixture and the general eccentric fixture, but also the use of eccentric to clamp the workpiece, the difference is in the side of the eccentric 28 equipped with a dial pin 27, the pin toggle adjustment block 26 to move the shaft 14 to the left and right, with