论文部分内容阅读
带警报装置的靠模杆,安装在铣床的立铣头侧面,以便加工中小型实体模具和型腔模具的不同截面过渡曲面时,利用警报装置来控制加工尺寸,使之手动操作铣削,接近于仿形铣床加工精度。具有制造简单、灵敏可靠、使用方便等特点。结构及工作原理:结构如图1所示。横杆3是通过螺母2、加垫圈1紧固于立铣头上。连接块4装于横杆上,可以左右调节与立铣头的相对位置。导杆8是两端有螺
The mold rod with alarm device is mounted on the side of the milling head for milling, so as to process different cross-section transition surfaces of the small and medium-sized solid mold and the cavity mold, the size of the processing is controlled by the alarm device so that the milling operation is performed manually, Copy milling machine processing accuracy. With a simple, sensitive and reliable, easy to use and so on. Structure and working principle: the structure shown in Figure 1. Beam 3 is through the nut 2, plus washer 1 fastened to the milling head. Connecting block 4 is mounted on the cross bar, you can adjust the relative position of the milling head left and right. Guide rod 8 is a screw on both ends