金刚石微粉磨具在光学冷加工中得到了越来越广泛的应用,但在前几年,使用金刚石磨具进行粗磨加工,对表面光洁度和边缘差要求比较高的零件,却还不能达到粗磨完工的要求。为了解决这个问题,把手磨这一道工序省掉,我们试用~#180粒度的磨轮,在铣磨效率基本不降低的前提下,做到了一次铣磨完工。一、磨具和机床设备1.磨具。~#180金刚石磨轮,浓度100%,青 Diamond micropowder has been more and more widely used in optical cold processing. However, in the previous years, rough grinding using diamond abrasive was not enough to achieve the required surface roughness and marginal difference Completion of the request. In order to solve this problem, the process of grinding hands to save this process, we try ~ 180 grain size of the grinding wheel, grinding efficiency basically does not reduce the premise, to achieve a milling completed. First, abrasive and machine tools 1. Abrasives. ~ # 180 diamond grinding wheel, the concentration of 100%, green