论文部分内容阅读
Dielectric, Optical and Thermal Properties of LDPE/ZnO Hybrid Film
【机 构】
：
School of Mechanic and Electric Engineering, Hubei Polytechnic University, Huangshi, 435003, China;C
【出 处】
：
武汉理工大学学报（材料科学版）（英文版）
【发表日期】
：
2015年1期
其他文献
The effect of carbonation on fatigue performance of ground granulated blast-furnace slag concrete was investigated. Based on the static compression tests of carbonated GGBS-concrete, the correlation between carbonation depth and compressive strength was a
A new corona protection varnish was prepared by using epoxy/montmorillonite nano-composite and pure epoxy resin as adhesives respectively. The adhesive with different amounts of organic montmorillonite (OMMT) was mixed with 1200 mesh silicon carbide (SiC)
The pyrolysis behavior of polycarbosilane (PCS) and chemical reaction mechanism during the pyrolysis process were studied by thermogravimetric-mass spectrometry (TG-MS) combined with X-ray diffraction and infrared spectroscopic analysis methods. The exper
Preparation and Characterization of Mullite-Silicon Carbide Heat Absorbing Ceramics for Solar Therma
Morphology Structure and Electrical Properties of NiCr Thin Film Grown on the Substrate of Silicon P
NiCr micron-resistor was designed and prepared by magnetron sputtering and lithography on the substrate of silicon with different powers. It is found that there exists a big gap in the TCR between the annealed group and the un-annealed group. A series of
Low-frequency Internal Friction Behaviour of Zr55Al10Ni5Cu30 Metallic Glass with Different Quenching
The correlation between the internal friction behaviour of Zr55Al10Ni5Cu30 BMG samples and their quenching temperatures was investigated. It was found that, below the glass transition temperature, the activation energy decreased with increasing quenching
By measuring the expansion curves of a Nb bearing steel at different cooling rates by using Gleeble-3800 thermomechanical simulator, combining with metallographic analysis, different phase zones were determined. Also, precipitation behavior of Nb at diffe
Carbon nanoparticles (C-dots) were prepared by relfuxing the combustion soots of candles and corn stalk in nitric acid. The synthesized C-dots were characterized. The results showed a sharp increase in oxygen content and a sharp decrease in carbon content