我厂先进生产者、中压车间青年铣工王新亚,创造了一种铣床多用夹具,提高了生产效率,扩大了铣床加工范围,使一些手工操作的工件能用铣床加工。夹具的构造:夹具的构造如图1所示,它由三部分组成:(一)横向运动机构——底座5由铸铁做成,夹具体11的滑轨套在底座的燕尾槽中。由键1和固定套3固紧在轴4上的齿轮2,和夹具体下面的齿条19咬合。齿条两端用六角螺钉18固定在夹具体上。扳动手柄28,就可以 Our factory advanced producers, medium-pressure workshop young milling workers Wang Xinya, to create a multi-purpose milling machine fixture to improve production efficiency and expand the milling machine processing range, so that some of the manual operation of the workpiece can be used milling machine processing. Fixture structure: Fixture structure shown in Figure 1, which consists of three parts: (a) lateral movement - base 5 made of cast iron, slide the clip body 11 in the base of the dovetail groove. The gear 2 fastened to the shaft 4 by the key 1 and the fixing sleeve 3 engages with the rack 19 under the clamp body. Both ends of the rack are fixed on the clamp body by hexagonal screws 18. Turn the handle 28, you can