论文部分内容阅读
在铣10mm 以下薄板时,往往因为夹紧面狭窄、不垂直,无法做到正确地安装在虎钳口内。因此不能保证工件的平行度及厚度尺寸的要求。我们从装夹方法和铣削方式两方面进行了改进,解决了薄板工作的铣削加工。一、装夹方法工件的装夹是先将薄板工件的两个侧面,用手拿着在砂
In the milling plate below 10mm, often because the clamping surface is narrow, not vertical, can not be properly installed in the vise mouth. Therefore, the workpiece can not be guaranteed parallelism and the thickness of the size requirements. We have improved both in terms of the clamping method and the milling method to solve the problem of the milling work on the sheet. First, the clamping method Workpiece clamping is the first two sides of the sheet metal workpiece, hand holding the sand