在带学生到保养厂、场实习期间,常遇到‘电磁操纵式”的起动机,有突出的二个报修故障。一、起动时,接通开关电路只听到“嘀嘀”响声,起动机不工作;其二,起动时,接通电路,“嘎嘎……”象打机关枪一样,发动机并不能起动。对此,我们走访了多处保修单位进行调查探讨,发现排除上述故障的普遍方法是:检查电池和起动电路后,调整“联动电磁 During the course of taking the students to the maintenance plant, during the field internship, it often encounters the ’electromagnetic control’ starter with two outstanding repair faults: 1. At the start-up, the switch circuit will only hear the beep sound and start Machine does not work; Second, start, turn on the circuit, “quack ......” Like a machine gun, the engine can not start.To this we visited a number of warranty units to investigate and found that to rule out the common method of failure Yes: Check the battery and start the circuit, adjust the "linkage electromagnetic