不锈钢与铜氧-乙炔钎焊时,由于它们的熔点、膨胀系数、导热系数存在很大差别,所以要想把它们焊到一起是比较困难的。为要顺利地施焊,除了采取合理的工艺措施外,还要选择合适的熔剂。氧-乙炔钎焊常用的熔剂多为硼砂或硼砂+硼酸。但在焊不锈钢与铜接头时,这种材料收效甚微。在生产实践中,试用了钎剂101作熔剂,取得了预期效果。钎剂101的特点是,它能有效地清除不锈钢加热时所产生的高熔点的氧化铬;而且它的流布性与渗透性都极佳,是一种理想的助熔剂。 Stainless steel and copper oxy-acetylene brazing, due to their melting point, expansion coefficient, thermal conductivity there is a big difference, so to weld them together is more difficult. In order to successfully apply welding, in addition to take reasonable process measures, but also to choose the right flux. Oxygen - acetylene brazing commonly used flux mostly borax or borax + boric acid. However, when stainless steel and copper joints are welded, this material has little effect. In the practice of production, the flux 101 was tested as flux, and the expected result was obtained. Binder 101 is characterized by its ability to effectively remove the heating of stainless steel produced by the high melting point of chromium oxide, and its flow distribution and permeability are excellent, is an ideal flux.