The deactivation of catalyst is a significant reason for its limited application during the catalytic fast pyrolysis (CFP) process.To reduce the coke formation,binary compound impregnation (BCI) and chemical liquid deposition (CLD) were used to modify HZSM-5 catalysts.At the same time,the self-designed microwave reactor separated the pyrolysis of bamboo and catalytic upgrading of primary vapor,which made the catalytic effect more thorough.Experimental results indicated that CLD used TiO2 deposition to cover external acid sites,while BCI by phosphorus-nickel could cover and partly destroy superficial acid sites through two different ways.Within the scope of the loaded amount studied,the yield of aromatic hydrocarbons in the oil phase increased at first and then decreased,while the coke formation reduced continuously.BTX (benzene,toluene and xylene),the most valuable product in bio-oil,drastically increased by 39.1％ and 22.6％ respectively over the CLD and BCI modified catalysts.Considering the catalytic performance as well as cost,CLD over HZSM-5 has more advantages in the CFP process to upgrade bio-oil.