Synthesis of magnetic two-dimensional materials by chemical vapor deposition

来源 :纳米研究(英文版) | 被引量 : 0次 | 上传用户:guo20
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
The development of magnetic two-dimensional (2D) materials in its infancy has generated an enormous amount of attention as it offers an ideal platform for the exploration of magnetic properties down to the 2D limit,paving the way for spintronic devices.Due to the nonnegligible advantages including time efficiency and simplified process,the facile bottom-up chemical vapor deposition(CVD) is regarded as a robust method to fabricate ultrathin magnetic nanosheets.Recently,some ultrathin magnets possessing fascinating properties have been successfully synthesized via CVD.Here,the recent researches toward magnetic 2D materials grown by CVD are systematically summarized with special emphasis on the fabrication methods.Then,heteroatoms doping and phase transition induced in CVD growth to bring or tune the magnetic properties in 2D materials are discussed.Characterizations and applications of these magnetic materials are also discussed and reviewed.Finally,some perspectives in need of urgent attention regarding the development of CVD-grown magnetic 2D materials are proposed.
其他文献
介绍一种由6-羟基己酸制备ε-己内酯的方法,该方法是将6-羟基己酸经过甲醇酯化得到6-羟基己酸甲酯、然后以γ-Al2O3为催化剂,6-羟基己酸甲酯经过环化转化成ε-己内酯,并研究了醇酸比、催化剂用量、温度对酯化率的影响,考察了环合温度对己内酯选择性的影响。最终确定:6-羟基己酸在醇酸比(质量比)为3、温度为55℃、催化剂用量为2.5%(相对于6-羟基己酸的质量而言),环合温度为320℃的条件下ε-己内酯选择性高达75.6%。
为提升太阳能热气流发电系统输出功率,对烟囱底部导流体的不同形状进行研究。基于等效速度理论,提出一种新型等效速度面划分方式,以此计算输出功率。通过数值模拟研究不同形状导流体对烟囱内部速度场和压力场的影响,将透平装置截面处依据模拟结果划分为高速区和低速区,并通过实验对模拟结果进行验证。结果表明:导流体形状不同,烟囱内部的速度场和压力场变化显著。高速区内圆台导流体对等效速度及输出功率的提升优于其他形状的导流体,且烟囱底部负压增幅最大,提升效果明显,模拟结果与实验具有较高的吻合度。
与一般推荐系统不同,由于儿童无法准确表述自己的阅读兴趣,儿童绘本推荐系统会出现特殊的冷启动问题。针对这个问题,提出一种基于隐式问询的个性化推荐技术,通过隐式询问儿童更容易回答的日常行为喜好,来推断儿童潜在的阅读喜好,提高推荐系统的准确率。首先,借助专家信息设计符合儿童日常行为的隐式问询题目;然后,建立隐式问询儿童兴趣模型,并计算出儿童的阅读兴趣;最后,生成绘本推荐列表。在全国连锁企业老约翰绘本馆和皮克布克绘本王国提供的真实数据集上进行了相关对比实验,实验结果表明,该隐式问询推荐技术有更高的准确度,能有效缓
Metal halide perovskites have emerged as novel and promising photocatalysts for hydrogen generation.Currently,their stability in water is a vital and urgent res
为了避免以往用酸碱刻蚀模板法制备空心二氧化硅纳米颗粒带来的安全和环保问题,提出一种高效绿色合成方法。以聚苯乙烯为模板,先将SiO2沉积在模板上,再通过煅烧去除PS模板,制备了空心二氧化硅纳米颗粒,并通过扫描电镜、透射电镜、X射线能谱分析仪、傅里叶变换红外光谱仪、X射线衍射仪、热重分析仪和物理吸附仪等对其结构进行表征。结果表明:所制备的空心二氧化硅纳米颗粒具有明显的空心结构,颗粒直径约为120 nm;组成元素为Si和O;在20~780℃环境下,空心二氧化硅纳米颗粒都具有优异的热稳定性;
Pillaring technologies have been considered as an effective way to improve lithium storage performance of Ti3C2Tx MXene.Nevertheless,the pillared hybrids suffer
Two-dimensional (2D) materials hold great promise for applications in optoelectronics,quantum information science,and energy conversion due to their remarkable
As a promising graphene analogue,two-dimensional (2D) polymer nanosheets with unique 2D features,diversified topological structures and as well as tunable elect
The application of polymers to replace oleylamine (OLA) and oleic acid (CA) as ligands for perovskite nanocrystals is an effective strategy to improve their sta
Lead telluride (PbTe) is one of the reliable candidates for infrared (IR) optoelectronics with optimum band-gap as well as excellent photoelectric properties.Gr