【摘 要】
:
A kind of fiber-optic sensor for simultaneous measurement of refractive index of surrounding medium, temperature and strain is described. Based on core diameter mismatch, a multimode-single mode-multimode (MSM) structure is presented. It is demonstrated t
【机 构】
:
KeyLaboratoryofFilmElectronicsandCommunicationDevicesandKeyLaboratoryofIntelligentComputingandNovelS
【出 处】
:
OptoelectronicsLetters
论文部分内容阅读
A kind of fiber-optic sensor for simultaneous measurement of refractive index of surrounding medium, temperature and strain is described. Based on core diameter mismatch, a multimode-single mode-multimode (MSM) structure is presented. It is demonstrated that the three parameters can be measured respectively by the interference of the core mode and cladding modes excited in the single mode fiber (SMF). Then combined with a polarization-maintaining fiber Bragg grating (PMFBG) which has different sensing properties from MSM structure, three parameters are measured simultaneously. The experimental results show that PMFBG is insensitive to the refractive index and the refractive index sensitivity of the MSM structure is 96.04 nm·RIU-1; the temperature sensitivities of the characteristic wavelength for MSM structure and the center wavelengths of fast and slow axes for PMFBG are 0.0911 nm . °C -1, 0.00976 nm . °C -1 and 0.0105 nm . °C -1, respectively; the strain sensitivities of those are -0.013 nm . με-1, 0.012 nm . με-1 and 0.012 nm . με-1, respectively.
其他文献
The laser shock processing implemented by a laser-induced high-pressure plasma which propagates into the sample as a shockwave is innovatively applied as a post-processing technique on HfO2/SiO2 multilayer coatings for the first time
在计入相干效应和考虑衬底影响的基础上,提出一种非破坏性的简易分析法。利用此法,由非晶硅试样的光谱透射曲线可确定膜层的厚度、折射率及吸收系数。作为例子,我们计算了α-Si:H及α-SiC:H薄膜的光隙。
介绍了严格最佳和准最佳(ν,κ,1)光正交码的定义,阐述了它们与(ν,κ,1)循环差集族的关系。基于Wilson均匀分布差引理和初等数论的基本理论,提出一种最佳(ν,κ,1)循环差集族的构造方法,即构造定义在v阶有限域上满足特定约束条件的k元集合。将该方法用于光正交码的设计中,可以有效地设计一些严格最佳(ν,κ,1)光正交码,其中,码长v为素数,码重k的取值为4、5和6。最后结合具体实例,给出严格最佳(ν,κ,1)光正交码的计算机辅助设计方法。同其他设计方法相比,该设计方法既简单又实用,尤其对严格最佳(ν
移动设备的快速普及,催生了一系列新的信息获取方式,其中,最具代表性的是已广泛应用于移动支付领域的二维码技术,它实现了二维码屏幕显示到相机拍照识别获取的新型通信。基于这种新的通信方式,引入信息隐藏技术构建不可见的二维码信息,使用户在获取信息的同时,减少由于引入可见二维码而带来的对载体信息感观的不良影响。该算法针对数字视频资源,利用频率约束方法将特定信息嵌入到载体之中,通过相机或手机在视频屏幕播放时进
Using numerical simulations, the nonlinear transmission performance of polarization-division-multiplexed quadrature-phase-shift-keying (PDM-QPSK) coherent systems is studied. It is found that inter-channel cross-polarization modulation (XPolM) induced non
使用FEMAG晶体生长模拟仿真软件以及自主开发的PVT法有限元传质模块对全自动、双电阻加热物理气相沉积炉开展了AlN晶体生长工艺过程中不同坩埚埚位对温度场、过饱和度场及烧结体升华速率等影响的模拟仿真分析研究。模拟仿真结果表明: 在给定工艺条件下, 坩埚埚位较低时烧结体温度较高且内部温差较小, 烧结体升华表面存在较大的Al蒸气分压梯度, 各表面升华速率较快且均匀, 籽晶衬底生长前沿温度场呈微凸分布, 有利于晶体扩径及生长高质量晶体。随着坩埚埚位的上升, 低温区向坩埚壁扩展, 预烧结体内轴向及径向温度梯度增加
High-strained InGaAs/InGaAsP multiple quantum wells (MQWs) distributed feedback (DFB) lasers, fabricated using metal organic chemical vapor deposition, are presented at 1.82 \mu m with a high side-mode-suppression ratio of 49.53 dB. The current- and temp
We propose a novel methodology based on the projector-camera (ProCam) system to address the photometric compensation issue for the projection display on the patterned screen.The patterned screen is treated as the combination of a perfect white screen and