《沃罗涅什重型机械压力机》生产联合公司制造了一台 K7538型四曲柄闭式双动压力机。这是一台工业试验性样机,压力为630/400吨,用于深拉伸形状复杂的大型金属薄板另件。压力机技术性能公称压力:内滑块 630吨外滑块 400吨滑块行程:内滑块 1000毫米外滑块 630毫米最大封闭高度:内滑块 1800毫米外滑块 1700毫米内外滑块的调整量 400毫米滑块尺寸:内滑块 2650×1900毫米外滑块 3140×2500毫米行程次数:连续 8～14次/分单压 6～10次/分工作台尺寸 3150×2500毫米垫板厚度 250毫米拉伸深度 320毫米压力机外形尺寸:平面 5260×4830毫米地面以上高度 9240毫米总高度 12700毫米 “Voronezh Heavy Machinery Press” production joint company to create a K7538 four-crank closed double-action press. This is an industrial pilot prototype with a pressure of 630/400 tons for deep drawing of large sheet metal parts with complex shapes. Press technical performance Nominal pressure: Inner slide 630 tons Outer slide 400 tons Slider stroke: Inner slide 1000 mm Outer slide 630 mm Maximum closure height: Inner slide 1800 mm Outer slide 1700 mm Adjustment of the internal and external slide The amount of 400 mm Slider size: the inner slider 2650 × 1900 mm Outer slider 3140 × 2500 mm The number of trips: 8 to 14 times / min Single pressure 6 to 10 times / min Table size 3150 × 2500 mm Thickness of the pad 250 Mm Stretching depth 320 mm Press Dimensions: Plane 5260 × 4830 mm Above the ground Height 9240 mm The total height of 12700 mm