Thermodynamics and technology of extracting gold from low-grade gold ore in system of NH4Cl-NH3-H2O

来源 :中国有色金属学会会刊(英文版) | 被引量 : 0次 | 上传用户:gaccia_zhou
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
According to the principles of simultaneous chemical equilibrium and electronic charge neutrality, the thermodynamics of Au-NH4Cl-NH3-H2O system was studied by using the exponential computation method and through MATLAB programming, and the solid figure of potential-c(NH4Cl)-c(NH4OH) was drawn. The results show that when the sum concentration of Au+ and Au3+ is equal to5 × 10-5 mol/L, ψ(Au+/Au) is about -0.2 V; when the sum comes up to 0.5 mol/L, the value of ψ(Au+/Au) increases to 0.2 V. In this case, ψ(O2/OH-) is as high as 0.7 V. This means that it is feasible to extract gold in this system. In addition, to predict the feasibility of reducing gold from the Au(Ⅰ)-NH4Cl-NH3-H2O system with copper or zinc powder, the solid figures of potential-c(NH4Cl)-c(NH4OH)for both systems of Cu-NH4Cl-NH3-H2O and Zn-NH4Cl-NH3-H2O were also drawn. The results indicate that both copper and zinc powders can reduce Au+ into metal gold, and zinc powder can also reduce H2O into H2, while copper powder can not. The leaching results of a cuprous gold ore show that the extraction of gold can reach 80% in this system. The preliminary results of reduction with copper and zinc powders show that with deoxygenizing, the reduction effects are relatively good.
其他文献
Straight carbon nanotubes (CNTs) were achieved by simple thermal chemical vapor deposition(STCVD) catalyzed by Mo-Fe alloy catalyst on silica supporting substra
The influence of stirring parameters (stirring temperature, stirring speed and stirring time) on the particle distribution of 10%(volume fraction) SiC particula
Lost foam casting (LFC) is regarded as a cost-effective, environment-friendly vital option to the conventional casting process for production of near-net shape
A new kind of reactive toughening accelerator for epoxy resin,amine-teminated hyperbranched polymer (H2O-NMe2) was synthesized and characterized by FT-IR spectr
The forming-regions of phosphate glasses doped with high Sm2O3 contents were studied by two step melting method. The relationship between absorption spectrum an
The numerical simulation for microstructure evolution of Al-Si alloy in solidification process is carried out with phase field model. The phase field model,solu
A new mechanical model for warm powder compaction was presented. Warm compaction process of iron-based powder was investigated to deal with the existence of ela
Acrylonitrile (AN) was copolymerized with N-isopropylacrylamide (NIPA) to synthesize thermosensitive bydrogels, and the on-off switch behavior of poly(NIPA-co-A
The effect of deformation via stress-induced martensitic transformation on the reverse transformation behavior of the (Ni47Ti44)100-xNbx (x=3,9,15,20,30,mole fr
La1-xSrxGa1-yMgyO3-δ (LSGM) electrolyte, La1-xSrxCr1-yMnyO3-δ (LSCM) anode and La1-xSrxFe1-yMnyO3-δ (LSFM) cathode materials were all synthesized by glycine-