Possibilities and impossibilities of magnetic nanoparticle use in the control of infectious biofilms

来源 :材料科学技术(英文版) | 被引量 : 0次 | 上传用户:aeo55121891
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
Targeting of chemotherapeutics towards a tumor site by magnetic nanocarriers is considered promising in tumor-control.Magnetic nanoparticles are also considered for use in infection-control as a new means to prevent antimicrobial resistance from becoming the number one cause of death by the year 2050.To this end,magnetic nanoparticles can either be loaded with an antimicrobial for use as a delivery vehicle or modified to acquire intrinsic antimicrobial properties.Magnetic nanoparticles can also be used for the local generation of heat to kill infectious microorganisms.Although appealing for tumor-and infectioncontrol,injection in the blood circulation may yield reticuloendothelial uptake and physical obstruction in organs that yield reduced targeting efficiency.This can be prevented with suitable surface modification.However,precise techniques to direct magnetic nanoparticles towards a target site are lacking.The problem of precise targeting is aggravated in infection-control due to the micrometer-size of infectious biofilms,as opposed to targeting of nanoparticles towards centimeter-sized tumors.This review aims to identify possibilities and impossibilities of magnetic targeting of nanoparticles for infection-control.We first review targeting techniques and the spatial resolution they can achieve as well as surface-chemical modifications of magnetic nanoparticles to enhance their targeting efficiency and antimicrobial efficacy.It is concluded that targeting problems encountered in tumor-control using magnetic nanoparticles,are neglected in most studies on their potential application in infection-control.Currently biofilm targeting by smart,self-adaptive and pH-responsive,antimicrobial nanocarriers for instance,seems easier to achieve than magnetic targeting.This leads to the conclusion that magnetic targeting of nanoparticles for the control of micrometer-sized infectious biofilms may be less promising than initially expected.However,using propulsion rather than precise targeting of magnetic nanoparticles in a magnetic field to traverse through infectious-biofilms can create artificial channels for enhanced antibiotic transport.This is identified as a more feasible,innovative application of magnetic nanoparticles in infection-control than precise targeting and distribution of magnetic nanoparticles over the depth of a biofilm.
其他文献
Solar-blind deep-ultraviolet (DUV) photodetectors based on Ga2O3 have attracted great attention due to their potential applications for many military and civil
The effect of adding D-fructose to simulated body fluid (SBF) on the corrosion behavior ofAZ31 magnesium (Mg) alloy at 37 ℃ and at a pH of 7.4 was studied by p
Solid solution strengthening is one of the most conventional strategies for optimizing alloys strength,while the corresponding mechanisms can be more complicate
Cyclic deformation behavior of friction-stir-welded dissimilar AA2024-T351 to AA7075-T65 aluminum alloy joints was evaluated via stepwise tests at different str
采用微合金化的设计思路,钢板成分在低C、低碳当量的基础上添加少量的Nb、Ti等微合金化元素,同时在冶炼过程中采用氧化物冶金技术,在TMCP轧制过程中采用针对低碳当量的超快冷
The heterogeneous deformation behavior of austenite and ferrite in the 2205 duplex stainless steel was subjected to multiscale analysis based on the in situ syn
Electricity is an efficient form of energy,and the growing interest in electricity-assisted manufacturing is motivated by its inherent energy saving and reduced
研究了Q345R低合金钢H10Mn2焊丝和SJ101焊剂焊接工艺,结果表明,焊接接头抗拉强度达到517MPa,大于母材最低值490 MPa,-20℃V型低温冲击功吸收值最小值98 J,高于最低要求41 J;
Nitrogen-doped carbon materials as promising oxygen reduction reaction (ORR) electrocatalysts attract great interest in fuel cells and metal-air batteries becau
研究了厚复层TA1/304复合板沿着爆轰波传播方向、距离起爆端不同位置处的焊接界面变化情况,通过金相分析及性能检测将复合界面的变化情况进行了整体分析,系统研究了在爆轰波传播过程中,界面的动态变化过程。结果表明:沿着爆轰波传播方向,焊接界面形态经历了无波,成波,波幅、波长增大,稳定至消失的动态变化过程。伴随着界面形态的改变,剪切强度先增加随后稳定,最终在起爆对边位置强度明显降低,剪切强度最低为230 MPa。在距起爆边300~400 mm处,界面波形态稳定,波幅比为0.22,剪切强度约为450 MPa。