论文部分内容阅读
MgNi-based hydrogen storage alloys Mg1–xTixNi (x = 0, 0.1, 0.2, and 0.3) were prepared by means of mechanical alloying. Mg in the alloy was partially substituted by Ti to improve the cycle stability of the alloys. The effects of the substitution of Ti for Mg on the microstructure and electrochemical performances of the alloys were investigated in detail. The results indicate that the substitution of Ti for Mg obviously decreases the discharge capacity, but it significantly improves their cycle stabilities. The microstructure of the alloys analyzed by X-ray diffraction (XRD) and scanning electron microscopy (SEM) shows that the alloys have a dominatingly amorphous structure. The substitution of Ti for Mg helps to improve the anti-oxidation/corrosion ability of the MgNi alloy but demolishes the electrochemical kinetics of hydrogenation/dehydrogenation. The Mg0.9Ti0.1Ni alloy electrode milled for 80 h exhibits the best integrative capability, which has the maximal discharge capacity of 331.66 mAh/g and the C30/Cmax of 63.65%.
Mg ni-based hydrogen storage alloys Mg1-xTixNi (x = 0, 0.1, 0.2, and 0.3) were prepared by means of mechanical alloying. Mg in the alloy was partially substituted by Ti to improve the cycle stability of the alloys. The effects of the substitution of Ti for Mg on the microstructure and electrochemical performances of the alloys were investigated in detail. The results of that the substitution of Ti for Mg obviously decrease the discharge capacity, but it significantly improves their cycle capacity. by X-ray diffraction (XRD) and scanning electron microscopy (SEM) shows that the alloys have a dominatingly amorphous structure. The substitution of Ti for Mg helps to improve the anti-oxidation / corrosion ability of the MgNi alloy but demolishes the electrochemical kinetics of hydrogenation / dehydrogenation. The Mg0.9Ti0.1Ni alloy electrode milled for 80 h exhibits the best integrative capability, which has the maximal discharge capacity of 331.66 mAh / g and the C30 / Cmax of 63.65%.