【摘 要】
：
The products of monoammonium phosphate containing Cr3+ resulted in disqualification, and further posed a serious threat to ecological environment and human beings. Herein, the porous adsorbent of fluor(calcium silicate) composites (FCSc) was prepared by h
【机 构】
：
College of Civil Aviation Safety Engineering, Civil Aviation Flight University of China, Guanghan 61
【出 处】
：
武汉理工大学学报（材料科学版）（英文版）
论文部分内容阅读
The products of monoammonium phosphate containing Cr3+ resulted in disqualification, and further posed a serious threat to ecological environment and human beings. Herein, the porous adsorbent of fluor(calcium silicate) composites (FCSc) was prepared by hydrothermal method using diatomaceous earth, hydrated lime and additive (NaF) as raw materials, which was characterized and used for the removal of Cr3+ from monoammonium phosphate solutions. The effects of different parameters, such as solution pH, initial Cr3+ concentration, temperature and contact time on the adsorption of Cr3+ onto FCSc were investigated in details. The results indicated that the adsorption process was in agreement with the pseudo-second-order kinetic model and Freundlich isotherm. The spontaneous and endothermic nature of the adsorption process was obtained by analyzing various thermodynamic parameters (△G0, △H0, and △S0). In addition, computational monte carlo simulations between Cr3+ ions and FCSc were conducted to elucidate the adsorption mechanism. Such kind of porous adsorbent provided a potential application in the removal of impurities from monoammonium phosphate industry.
其他文献
A series of solar radiation tests for the polytetrafluoroethylene(PTFE) bulk and film samples were carried out using Q-SUN XE-3-HSC type Solar Radiation Simulator,with the test parameters as follows:radiation intensity is 1 120 W/m2,temperature is 55 ℃ an
A series of poly (ethylene oxide) (PEO) membranes with star-like structures for CO2/H2 separation were prepared by the photo-polymerization method.The structure of PEO membrane was characterized by Fourier transform infrared spectroscopy (FTIR).The therma
Nanocrystalline and amorphous LaMg12-type LaMg11Ni+xwt％ Ni (x = 100, 200) alloys were synthesized by mechanical milling. Effects of Ni content and milling time on the gaseous and electrochemical hydrogen storage kinetics of as-milled alloys were investiga
Nitrogen doped multi-channel graphite was successfully prepared by using nitrogen doping and KOH etching technologies. The three-electrode and EIS tests indicates that the etched graphite possesses lower electrochemical resistance than the pristine graphi
The viability of using polypropylene fibers (PPF) in concrete was largely studied. Yet, few of the existing research studies investigated the effects of PPF on the properties of concrete containing recycled concrete aggregate (RCA). Mixes with different R
The Be films were prepared by thermal evaporation at different sources to substrate distances (SSD) on glass substrates. The decrease of SSD from 90 mm to 50 mm caused the increase of substrate temperature and the rising density of incident Be atoms, thus
The results of the study of raw mix preparation and foam glass-ceramics production using diatomite as a raw material were presented in the following article. A mixture of diatomite and 40％ NaOH solution was subjected to heating at a constant temperature o
Autoclaved aerated concrete waste (AACW) was used as a raw material to prepare nucleation seed for acceleration of Portland cement. Nano AACW seed with median particle size of 324 nm was prepared by wet grinding method. Both the electrical conductivity an
Ultrafine grain tungsten heavy alloys (WHAs) were successfully produced from the nano-crystalline powders using spark plasma sintering. The present study mainly discussed the effects of sintering temperature on the density, microstructure and mechanical p
Aiming to investigate the mix design of eco-friendly UHPC with supplementary cementitious materials and coarser aggregates, we comprehensively studied the workability, microstructure, porosity, compressive strength, flexural strength, and Young\'s modul