论文部分内容阅读
机车在实际工作中难免会出现一些小故障,现介绍几种应急修理的方法,但此法只是权宜之计不能维持长久,在保养中必须修理或更换。 1.油管破裂或折断若油管破裂,可将油管的破裂处擦净,然后用绝缘胶布缠绕几圈即可继续使用。待机车起动后,油管也随之变热,管子越热,胶布的粘着性能越好。使用这种方法比用涂肥皂、缠布条的修理方法可靠;若油管折断,可找一根内径与油管外径相当的胶皮管或塑料管套接,如套接不紧密,两端可用金属丝扎紧,以防漏油。
Locomotives in the actual work will inevitably be some minor problems, are introduced to several emergency repair methods, but this method is only an expedient measure can not be maintained for a long time, must be repaired or replaced in the maintenance. 1. Tubing rupture or breakage If the tubing ruptures, the rupture of the tubing can be wiped clean and then a few turns of insulating tape can be used continuously. After the locomotive starts, the tubing will also become hot, the hotter the pipe, the better the adhesive performance of the tape. Use this method than the use of soap, wrapping the repair method is reliable; if the tubing is broken, you can find a hose diameter or tubing diameter plastic hose or plastic pipe socket, such as the socket is not tight, both ends of available metal Tight wire to prevent oil leakage.