高效切削非金属垫圈工具,解决我厂一关键,经过一年多的生产实践,提高了生产效率和加工零件的质量,大大减轻了工人的劳动强度,做到了文明生产,为非金属垫圈的加工开辟了新途径。现介绍如下:一、新旧加工非金属垫圈的方法对比一般工厂加工非金属垫圈是采用冲头。其过程是:先将非金属放在木制或较软的底板上,再把冲头放上,工人用大锤轮番加工直至成活;有的用手工剪切。在专业性的工厂中,用专用模具在冲床上进行冲剪成活。 Efficient cutting non-metallic washer tools to solve a key plant, after more than a year of production practice, improve production efficiency and quality of parts processed, greatly reducing the labor intensity of workers, so that civilized production, non-metallic gasket processing Opened up new ways. Are introduced as follows: First, the old and new processing of non-metallic washers compared to the general factory processing non-metallic washers are used punch. The process is: first non-metallic on the wooden or softer floor, and then placed on the punch, the workers use the sledgehammer round processing until alive; and some cut by hand. In a professional factory, with a special die in the punch punching survival.