溶液与熔融相结合法合成端羟基聚乳酸

来源 :塑料 | 被引量 : 0次 | 上传用户:nonomad
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
以D,L-乳酸、1,4-丁二醇为原料,采用溶液与熔融相结合法合成了端羟基聚乳酸。探讨了单催化剂和双催化剂种类对聚合反应的影响,采用傅里叶红外光谱仪、核磁共振仪、万能实验机和热重分析仪对端羟基聚乳酸进行了结构与性能表征。结果表明:使用双催化剂0.5%的氯化亚锡(SnCl2)和0.3%的对甲苯磺酸(p-TSA)催化效果最好,在10 h内所得端羟基聚乳酸的Mη为32653,是相同条件下采用直接熔融缩聚法合成产物Mη的2倍以上,同时产物具有最佳的综合力学性能和热稳定性。 D, L-lactic acid and 1,4-butanediol were used as raw materials to synthesize hydroxyl terminated polylactic acid by the combination of solution and melt. The effects of single catalyst and double catalyst on the polymerization were discussed. The structure and properties of hydroxyl terminated polylactic acid were characterized by Fourier transform infrared spectroscopy, nuclear magnetic resonance spectroscopy, universal testing machine and thermogravimetric analyzer. The results showed that the catalytic activity of 0.5% SnCl 2 and 0.3% p-TSA was the best, and the Mη of hydroxyl terminated polylactic acid was 32653 within 10 h Under the conditions of direct melt polycondensation synthesis product Mη more than 2 times, at the same time the product has the best comprehensive mechanical properties and thermal stability.
其他文献
期刊
期刊
外观形态rn葡萄产地不同,品种不同,风味、特点也不同. 选购时首先注意外观新鲜,果穗大小适宜且整齐,果梗新鲜牢固,果粒饱满,大小均匀,青籽和瘪籽较少,外有白霜者品质最佳;新
采用“满射”气辅注塑方式,利用正交试验中的均值分析、方差分析和综合评分法,研究了模具温度、熔体温度、气体延迟时间、注气压力和注气时间等工艺参数对塑件气体穿透长度及
探讨了塑料注射模具在工作过程中产生变形的成因,建立了注射模具变形的测量方法,并根据测量结果分析了注射模具在工作过程中的变形规律,为优化注射模具的设计和加工工艺参数
期刊