【摘 要】
：
提出太阳能光伏非碳冶金的概念,分析太阳能光伏非碳冶金系统结构,并根据研究要求进行系统参数的匹配及选择。根据能量匹配与整合,设计制造公称容量为1kg的太阳能光伏非碳冶金
【机 构】
：
北京科技大学冶金与生态工程学院,中国国际工程咨询公司,
论文部分内容阅读
提出太阳能光伏非碳冶金的概念,分析太阳能光伏非碳冶金系统结构,并根据研究要求进行系统参数的匹配及选择。根据能量匹配与整合,设计制造公称容量为1kg的太阳能光伏非碳冶金实验系统并进行相关实验。通过初步的系统能量分析,验证系统参数。结果表明,所设计的系统满足冶炼要求,有很好的稳定性及可操作性。
The concept of solar photovoltaic non-carbon metallurgy is proposed, the structure of solar photovoltaic non-carbon metallurgy system is analyzed, and system parameters are matched and selected according to the research requirements. According to energy matching and integration, the design and manufacture of a nominal capacity of 1kg solar photovoltaic non-carbon metallurgical experimental system and related experiments. Through the initial system energy analysis, verify the system parameters. The results show that the system designed to meet the smelting requirements, have good stability and operability.
其他文献
SrF2-coated LiMn2O4 powders with excellent electrochemical performance were synthesized. The electrochemical performance of SrF2-coated LiMn2O4 electrodes was s
This paper presents an efficient and reliable genetic algorithm (GA) based particle swarm optimization (PSO) technique (hybrid GAPSO) for solving the economic d
针对机械故障诊断中存在的小样本、模糊、不确定性特征数据等问题,将改进三角模糊理论与支持向量分类机(SVM)方法相结合,提出一种Fv-SVM模型,给出相应的机械故障诊断方法.最
An experiment in seed morphology and seed germination techniques of Albizia procera was carried out in the nursery of the Forestry and Wood Technology Disciplin
The collision efficiency of dioctyl phthalate nanoparticles in Brownian coagulation has been studied.A set of collision equations is solved numerically to find
目的 了解目前阿坝地区儿童大骨节病的患病情况及可能存在的影响因素,为大骨节病的预防和治疗提供一定的理论依据.方法 对310名儿童进行相关量表的调查,初步了解大骨节病在儿
以太阳池和多孔介质材料为研究对象,通过原理性实验研究碳化硅泡沫陶瓷、煤质吸附剂、陶瓷小球及锅炉渣4种多孔介质材料的蓄热、降浊特性.在此基础上,建立两个面积为2.4m×2.
对基于摄动的模糊聚类算法进行深入研究.给出一个模糊相似矩阵的实例,存在与该矩阵距离相同且都是最小的两个不相等的模糊等价矩阵,从而证明了全局最优模糊等价矩阵不具有唯
In order to evaluate uncertainties in computational fluid dynamics (CFD) computations of the stagnation point heat flux,a physical criterion is developed.Based
The elastic-plastic stress distribution and the elastic-plastic boundary configuration near a crack surface region are significant but hard to obtain by means o