【摘 要】
：
Melt-spun Nd4.5Fe4.5B18.5 ribbons were prepared under various superheat temperatures.The microstructure characteristics,crystallization behavior,and subsequent
【机 构】
：
School of Materials Science and Engineering,College of Materials Science and Engineering,Shenzhen Ke
论文部分内容阅读
Melt-spun Nd4.5Fe4.5B18.5 ribbons were prepared under various superheat temperatures.The microstructure characteristics,crystallization behavior,and subsequent magnetic properties of Fe3B/Nd2Fe14B nanocomposite magnets were investigated using X-ray diffraction,differential thermal analysis,and vibrating sample magnetometry.It was shown that melt spinning at different quenching temperatures caused the as-quenched ribbons to have distinctive crystallization behavior.Depending on superheat temperature,phase transformation of the ribbons during annealing may take place in one of the following sequences:(1)amorphous phase(Am)→Am'+Fe3B→Fe3B+Nd2Fe23B3→Fe3B+Nd2Fe14B,or(2)amorphous phase(Am)→Am'+Fe3B→Fe3B+Nd2Fe14B.For the latter,the ribbon after optimal annealing exhibited single-phase magnetic behavior.In the first case,magnetic properties of the optimally heat treated ribbons deteriorated and an apparent kink could be seen along the demagnetization curves near the zero field.
其他文献
Ce-Cu-O monolithic catalysts were prepared by using Ce0.9Cu0.101.9 solid solution or nitrate as precursors,and their catalytic performance for the combustion of
Using solid-state synthesis method,a series of samples of lanthanum doped Li1-xLaxFePO4(x=0.0025,0.005,0.0075,0.01)were prepared.Each cathode structural and ele
In order to obtain the thermodynamic description of the Mg-Ga binary system, the thermodynamic assessment of the system was carried out using the CALPHAD method
The microstructure and properties of the 93W-4Ni-2Co-1Fe (mass fraction, %) tungsten heavy alloys prepared by mechanical alloying and electric current activated
With the development of aero-engine,gas import temperatures of hot section structural materials are increasingly higher.Metal alloy materials due to the rapidly
We investigated the transport properties of isoelectronic substitution of Yb by Ca for Zintl phase YbCd2Sb2 below 300 K.The p-type Yb1-xCaxCd2Sb2(0.2≤x≤0.8)sa
The β-SiC/SiO2 core-shell nanowires with the "stem-and-node" structure were synthesized in the presence of cerium oxide by the carbothermal reduction of the st
Single crystals of LaP3O9·3H2O were prepared using a classical method of aqueous chemistry whereas those of the ultraphosphate LaP5O14 were obtained by flux me
High cycle fatigue behavior of die cast AZ91D magnesium alloy with different Nd contents was investigated.Axial mechanical fatigue tests were conducted at the s
In view of high strength and poor impact toughness of the high-zinc magnesium alloys, the method of micro-alloying was adopted to improve the impact-toughness o