多组分碳氢燃料RP-3导热系数实验

来源 :北京航空航天大学学报 | 被引量 : 0次 | 上传用户:liongliong441
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
基于经典的瞬态热线法原理,设计研制了一种适用于高温高压条件下测量多组分碳氢燃料导热系数的实验装置.对无水乙醇、甲苯及高压氮气进行了标定,结果表明液相导热系数最大偏差在1%以内,气相导热系数最大偏差在3%以内.进而对国产碳氢燃料RP-3导热系数进行了测定,温度范围298~430 K,压力范围0.1~5 MPa.改进和完善了超临界压力下流体导热系数的测量方法. Based on the classical theory of transient hot-wire method, an experimental device suitable for measuring the thermal conductivity of multicomponent hydrocarbon fuel under high temperature and high pressure was designed and developed. The calibration of absolute ethanol, toluene and high pressure nitrogen showed that the liquid phase The maximum deviation of thermal conductivity is within 1%, and the maximum deviation of gas-phase thermal conductivity is within 3% .Then the thermal conductivity of domestic hydrocarbon fuel RP-3 is measured, the temperature range is 298 ~ 430 K and the pressure range is 0.1 ~ 5 MPa. Improve the measurement method of thermal conductivity of fluid under supercritical pressure.
其他文献
目的观察拉尖牙向远中移动时,在不同规格的弓丝作用下,牵引力对支抗磨牙所产生的舌向分力的大小以及在不同磨牙外展曲宽度下该牵引力舌向分力的大小.方法利用与北京大学力学系合作研制的力测量仪在Typodont专用蜡上测量使用不同规格、不同刚度的弓丝[0.40 mm、0.45 mm的不锈钢圆丝,0.40mm、0.45 mm的澳丝以及0.41 mm×0.56 mm(0.016英寸×0.022英寸)、0.46
本文通过对荣华二采区10
期刊