小直径PRC管桩在深基坑支护中的应用分析

来源 :纯碱工业 | 被引量 : 0次 | 上传用户：poloya

【摘要】

：

PRC管桩在工业建设领域中的应用现如今已经较为广泛,以其作为支护桩对于深基坑的支护工程来说也是尤为重要的一个施工环节.本文以国内某地的一项深基坑支护工程为例,其施工场地的土质为粉质粘土和粗砂土,其选用的PRC管桩为直径六百毫米,长七米和八米的小直径PRC管桩,将其桩端打入土地层下大概三米深.小直径的PRC管桩具有较高的刚度,并且将其运用在这种深基坑支护工程中能够让工程的效率提升.本文就以此深基坑支护工程为例,对小直径PRC管桩的具体应用进行分析探析,希望能够对我国今后的工程施工的发展提供一定的研究帮助.

【作者】

：

唐创陈宏伟

【机构】

：

湖南城市学院,湖南益阳 413000

【出处】

：

纯碱工业

【发表日期】

：

2022年1期

【关键词】

：

小直径PRC管桩深基坑支护支护桩应用探析

下载到本地 , 更方便阅读

下载此文赞助VIP

声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架

论文部分内容阅读

其他文献

氯化铵回转干燥工艺能耗和尾气排放分析

介绍了氯化铵的回转干燥工艺.从工艺、能耗、环保、非满负荷工况等方面对内加热流化床工艺和回转干燥工艺进行了对比分析.研究证明,回转干燥工艺的汽耗、电耗、尾气排放量均大幅度低于内加热流化床工艺.在非满负荷工况时,效果更加显著.

期刊

氯化铵回转干燥流化床能耗尾气负荷

含氟天然碱精制提纯重质纯碱的工艺研究

采用系统循环母液保温转化-冷结晶纯化工艺对国外某含氟天然碱进行除氟工艺技术研究,除氟率达到83.42％.经除氟后的转化母液冷却结晶得到十水碱,再通过热溶精制、蒸发结晶和煅烧分解得到高品质重质纯碱,纯度高达99.5％以上,解决了含氟天然碱精制提纯重质纯碱的关键技术难题.本技术成功回收了系统母液,提高了资源利用效率,同时副产的含氟渣通过精制也可制成NaF用于涂装工业等领域,为含氟天然碱的绿色开发奠定了理论基础.

期刊

天然碱重质纯碱除氟精制纯化蒸发结晶

Humidity-control assists high-efficient coal fly ash removal by PTFE membrane

In the present study,the effects of relative humidity on filtrating coal-fired fly ash with hydrophobic poly tetra fluoroethylene (PTFE) membranes were investigated.The intergranular force of particulate matter at different RH conditions was measured by a

期刊

Relative humidityCollapse anglePressure dropPoly tetra fluoroethylene (PTFE)

Synthesis of spinel ferrite and its role in the removal of free fatty acids from deteriorated vegeta

Deterioration and loss of quality of vegetable oil is a big challenge in the food industry.This study inves-tigated the synthesis of nickel ferrite (NiFe2O4) via co-precipitation method and its use for the removal of free fatty acids (FFAs) in deteriorate

期刊

AdsorptionCo-precipitationDeteriorated vegetable oilFree fatty acid (FFA)Lan

Comparative study of heat transfer and pressure drop for curved-twisted tubes utilized in chemical e

Increasing importance of heat transfer in chemical engineering science causes that investigation in the field of enhancement techniques is always one of the up-to-date topics for study.In the current compar-ative analysis,the thermal enhancement and frict

期刊

Computational fluid dynamicsHeat transferLaminar flowCurved-twisted tubesCom

Impact of nanoparticle shape on thermohydraulic performance of a nanofluid in an enhanced microchann

In this article,the thermal-hydraulic efficacy of a boehmite nanofluid with various particle shapes is eval-uated inside a microchannel heat sink.The study is done for particle shapes of platelet,cylinder,blade,brick,and oblate spheroid at Reynolds number

期刊

NanofluidThermohydraulic performanceNanoparticle shapeMicrochannel heat sink

Growth and aggregation micromorphology of natural gas hydrate particles near gas-liquid interface un

To investigate the morphological evolution of the whole growth and aggregation processes of hydrate crystals near the gas-liquid interface,we used a high-pressure visual reactor with high-speed camera to capture the micromorphology of hydrate particles in

期刊

Natural gas hydrateGrowthAggregationGas-liquid interfaceMicromorphologyPhys

The effect of operating and design parameter on bubble column performance:The LOPROX case study

It is known that the performances of multi-phase reactors depend on the operating parameters (the tem-perature and the pressure of the system),the phase properties,and the design parameters (the aspect ratio (AR),the bubble column diameter,and the gas spa

期刊

Bubble columnScale-upGas holdupInterfacial areaLOPROX

Optimization of catalyst pellet structures and operation conditions for co methanation

A fundamental understanding of the effects of catalyst pellet structures and operation conditions on cat-alytic performance is crucial for the reactions limited by diffusion mass transfer.In this work,a numerical investigation has been carried out to unde

期刊

CO methanationNumerical simulationCatalyst pelletShape effectsReaction-diffu

Design of process and control scheme for cyclohexanol production from cyclohexene using reactive dis

Cyclohexanol is a commonly used organic compound.Currently,the most promising industrial process for synthesizing cyclohexanol,by cyclohexene hydration,suffers from a low conversion rate and difficult separation.In this paper,a three-column process for ca

期刊

Cyclohexene hydrationCatalytic distillationControl schemesDynamic Simulation

小直径PRC管桩在深基坑支护中的应用分析

与本文相关的学术论文