论文部分内容阅读
汽车前照灯是汽车夜间行驶的主要照明灯。现有装置仅对自身输出光束的强弱进行控制,而不能有效地对输出的光束发散角进行控制和聚光。因而在两车交会时,极易造成司机的眩目,特别是高速行驶或人车不分的道路上,由于强光的刺激,极易引发交通事故。本实用新型专利在机构控制下,可使光束开合、形状发生变化,从而方便地调整光束输出的强弱和光束变形,有效地克服了光束的发散角,使眩目现象大大降低。本产品由以下几部件组成:聚光筒、光源位移装置、光束输出变形装置、光源、反光罩、总控制器等。
Car headlamps are the main driving lights at night. The existing device only controls the intensity of its own output beam, but can not effectively control and concentrate the output beam divergence angle. Therefore, the two cars rendezvous, the driver can easily cause dazzling, especially high-speed driving or car on both sides of the road, due to glare stimulation, can easily lead to traffic accidents. Under the control of the mechanism, the utility model can open and close the light beam and change its shape, thereby conveniently adjusting the intensity of the light beam output and the deformation of the light beam, effectively overcoming the divergence angle of the light beam and greatly reducing the dazzling phenomenon. The product consists of the following components: condenser tube, light displacement device, the beam output deformation device, light source, reflector, the total controller.