【摘 要】
：
Due to the intense vibration during launching and rigorous orbital temperature environment,the kinematic parameters of space robot may be largely deviated from
【机 构】
：
State Key Laboratory of Robotics and System,Mechanical Engineering and Automation
【基金项目】
：
国家自然科学基金;The National High Technology Research and Development Program of China
论文部分内容阅读
Due to the intense vibration during launching and rigorous orbital temperature environment,the kinematic parameters of space robot may be largely deviated from their nominal parameters.The disparity will cause the real pose (including position and orientation) of the end effector not to match the desired one,and further hinder the space robot from performing the scheduled mission.To improve pose accuracy of space robot,a new self-calibration method using the distance measurement provided by a laser-ranger fixed on the end-effector is proposed.A distance-measurement model of the space robot is built according to the distance from the starting point of the laser beam to the intersection point at the declining plane.Based on the model,the cost function about the pose error is derived.The kinematic calibration is transferred to a non-linear system optimization problem,which is solved by the improved differential evolution (DE) algorithm.A six-degree of freedom (6-DOF) robot is used as a practical simulation example,and the simulation results show:1) A significant improvement of pose accuracy of space robot can be obtained by distance measurement only; 2) Search efficiency is increased by improved DE; 3) More calibration configurations may make calibration results better.
其他文献
Category-based statistic language model is an important method to solve the problem of sparse data.But there are two bottlenecks:1) The problem of word clusteri
Tungsten coating is considered as a promising alternative material for plasma facing materials(PFC)in future fusion devices.The electro-deposition of tungsten i
The effects of preheat treatments on the microstructures and mechanical properties of tungsten inert gas (TIG)-welded AZ61 magnesium alloy joints were studied b
Similarity measure construction has been proposed as fault detection of flight test method in order to obtain the primary control surface stuck and the combinat
The dissolution kinetics of malachite was investigated in ammonia/ammonium sulphate solution.The effects of ammonia and ammonium sulphate concentration,pH,leach
The realization of the parameter estimation of chirp signals using the fractional Fourier transform (FRFT) is based on the assumption that the sampling duration
The effect of geosynthetic reinforcing on bearing capacity of a strip footing resting on georeinforced clayey slopes was investigated.The results of a series of
Multistage centrifugal impellers with four different skew angles were investigated by using computational fluid dynamics.The purpose of this work is to investig
A novel Krein space approach to robust H∞ filtering for linear uncertain systems is developed.The parameter uncertainty,entering into both states and measureme