以防爆电机甩水环为例,利用计算机程序进行铸造工艺的优化设计。在生产中,原始工艺存在很大的铸造缺陷,并通过模拟技术验证了这些缺陷。为了消除这些铸造缺陷,通过在必要部位设置冒口,对原始工艺进行了优化。模拟结果表明,新工艺解决了铸造过程中的缺陷。最后通过实际生产,证明该工艺的合理性。 Taking explosion-proof motor as an example, the optimization design of casting process is carried out by using computer program. In the production, the original process has a lot of casting defects, and through simulation technology to verify these defects. To eliminate these casting defects, the original process was optimized by setting risers where necessary. The simulation results show that the new process solves the defects in the casting process. Finally, through the actual production, to prove the rationality of the process.