【摘 要】
：
A new organic-inorganic hybrid material, which shows photo-induced reduction of refractive index as well as volume contraction, is prepared using a sol-gel method. This material is coated on a Si substrate by spin-coating to manufacture film. After irradi
【机 构】
：
StateKeyLaboratoryofModernOpticalInstrumentation,ZhejiangUniversity,Hangzhou310027,China
【出 处】
：
ChineseOpticsLetters
论文部分内容阅读
A new organic-inorganic hybrid material, which shows photo-induced reduction of refractive index as well as volume contraction, is prepared using a sol-gel method. This material is coated on a Si substrate by spin-coating to manufacture film. After irradiated by ultraviolet (UV) light with a deuterium lamp for 5 h, the thickness of film decreases largely by 55%, and the refractive index of film changes from 1.484 to 1.445 at 550 nm. The film’s optical thickness exhibits an exponential change with the increasing irradiation time. Futhermore, the photo-patternning of the organic-inorganic hybrid film without any further process (wet etching and thermal curing) is performed utilizing the volume contraction on UV-light irradiation. This film has potential applications for fabrication of patterned filter array and apodizing filter by direct light writing, and also demonstrates good temperature stability and immunity to visible light exposure.
其他文献
美国马丁公司制造的脉冲气体光激射器的输出的峰值已超过300瓦。这种型号的光激射器，在波长1.117微米的一条单色谱线上产生这个最高的功率。
制备了用于LED照明的光散射材料,研究了制备过程中,硅氧烷支端基团、硅氧烷与水的摩尔比值、水解过程中的溶液pH值、水解时间、缩合过程中溶液的pH值及缩合时间对光散射粒子粒径及形貌的影响。并制备了不同光散射粒径大小、板材厚度和光散射粒子添加浓度的光扩散板。结果表明,在原料摩尔比值一定的情况下,对光散射粒子粒径影响因素从大到小排序是:聚合过程中的pH值、水解时间、聚合时间、水解过程pH值,而影响光散射粒子形貌的主要原因是硅氧烷与水的摩尔比值。随着粒径的增加,光扩散板厚度的减小以及添加浓度的增加,光扩散板的透光
近年来,智能机器人技术逐步成熟,以目标识别为代表的机器视觉技术是其核心。现有目标识别算法通常先根据颜色信息分割场景,再提取特征以识别目标。但对于颜色信息比较复杂的场景,往往存在过分割现象,影响后续目标识别。针对这一问题,提出一种基于局部特征的多目标图像分割算法。该算法使用双目摄像头采集场景图像,对场景图像进行预处理,同时通过立体匹配得到场景的深度信息;结合深度信息确定目标区域;设计动态阈值的尺度不变特征变换(SIFT)算法以提取目标区域的局部特征,将局部特征转化为特征约束;基于区域约束、特征约束和空间信息
Light-induced transverse thermoelectric effect is investigated in incline-oriented Bi2
Thermal nanoimprinting is a fast and versatile method for transferring the anti-reflective properties of subwavelength nanostructures onto the surface of highly reflective substrates, such as chalcogenide glass optical fiber end faces. In this paper, the
加拿大维里恩联合公司制造的小型毫米波速调管的成品率，通过使用脉冲红宝石激光焊接设备，已由原来的20%增加到95%以上。通常电阻焊接技术中的主要问题是用来安置管子高温阴极管脚的耐熔金属(如钼、钽、钛等）不能令人满意地焊好，另外，被连接的组件尺寸较小，电极可用的空间有限，都是使它们受到限制的因素。
A new method to count the expected value and variance of time dispersion is presented for time dispersion of underwater optical wireless communication. Instead of the typically used Gamma distribution, inverse-Gaussian distribution is suggested for underw
We theoretically study a quantum destructive interference (QDI)-induced photon blockade in a two-qubit driven cavity quantum electrodynamics system with dipole–dipole interaction (DDI). In the absence of dipole–dipole interaction, we show that a QDI-induc
基于非线性放大环形镜,设计了一种全正色散掺镱光纤锁模激光器。在抽运功率为80 mW的情况下,该掺镱光纤锁模激光器可以实现平均功率为7.8 mW的稳定输出。输出激光脉冲的重复频率为9.9 MHz,中心波长为1064 nm,脉冲宽度约为18 ps,相应的光谱宽度为0.18 nm。该激光器具有结构简单、自启动、稳定性高的优点。
For moving objects, 3D mapping and tracking has found important applications in the 3D reconstruction for vision odometry or simultaneous localization and mapping. This paper presents a novel camera architecture to locate the fast-moving objects in four-d