Measurement of ~(135)Cs with AMS at CIAE

来源 :Annual Report of China Institute of Atomic Energy | 被引量 : 0次 | 上传用户:w346399938
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
~(135)Cs with a half life of T1/2=2.3×106 a is an interesting nuclide in studies of the dispersal of nuclear material in the environment.Preliminary measurements of ~(135)Cs with accelerator mass spectrometry(AMS)have been developed at China Institute of Atomic Energy(CIAE).In order ~ (135) Cs with a half life of T1 / 2 = 2.3 × 106 a is an interesting nuclide in studies of the dispersal of nuclear material in the environment. Preliminary measurements of ~ (135) Cs with accelerator mass spectrometry (AMS) have been developed at China Institute of Atomic Energy (CIAE) .In order
其他文献
The electromagnetic isotope separator EMIS-170 is constructed based on the early domestic F-3isotope separator,and the 280 t electromagnet is still used.The mai
In-core temperature control and monitoring is a critical process in a nuclear reactor.Thermocouple based on temperature measurement is one of the techniques sui
采用表面喷丸处理和两次连接方法获得不锈钢/Cu-镁合金连接接头。采用万能试验机测试焊接接头的拉伸强度,采用扫描电镜及自带能谱仪观察连接接头显微组织及元素分布,采用显微
On September 28,the comprehensive technological renovation of the CIAE~’s electromagnetic isotopeseparator passed the acceptance check organized by the State A
We had mainly carried on the debugging and commissioning of CYCIAE-100 for HI-13 Tandem Accelerator Upgrade Project in 2016.The installation and commissioning o
1 Information of operation and production Operation person:Present chief operators are 6 persons,operators are 3 persons;new chief operators is 0person,new oper
2015年4月29日,太行国宾馆柏坡厅,省政协十一届十二次常委会议在这里举行。依照惯例,每位常委及列席人员的会议材料当中,都会有两本省政协办公厅印发的大会发言合订本,一本是
The generation Ⅲ nuclear power plant designs incorporate latest research results in the field of nuclear safety and a wealth of operational experience in nucle
The terminal voltage of 5SDH-2 pelletron accelerator is from 150 kV to 1.7 MV,so the energy of single charge particle accelerated is from 300 keV to 3.4 MeV.The
According to the service condition of nuclear power plant,optimizing the water chemical parameters is one of the most economical and effective methods to improv