论文部分内容阅读
Transparent Mirror
【出 处】
：
中国铸造：英文版
【发表日期】
：
2018年2期
其他文献
Since 1952,Huazhong University of Science and Technology(HUST)was founded,or even further back,the German doctor Erich Paulun founded Tongji Medical University(
投资扔广泛地在与精确性，通用性和正直的关键好处生产 TiAl 部件作为最好的选择被认出了。为投资扔的陶器的模子的 collapsibility 由于 TiAl 在房间温度的内在的易碎物在 TiA
With the sixth large-scale railway speed-up,the quality of the axles is essential to the safety of the locomotive.According to the high-speed axle technical sta
Semisolid rheoforming(SSR)is a promising technology for the production of Mg wrought alloy in foundry settings.In order to realize SSR,it is necessary to charac
The intermetallic Ti-43Al-2Cr-2Nb（at.%） alloy was directionally solidified in an electromagnetic cold crucible with different withdrawal rates（V） ranging from 0.2 t
The compressive properties of aluminum foams by gas injection method are investigated under both quasi-static and dynamic compressive loads in this paper. The e
期刊
Abnormal mechanical property evolution induced by heat treatment for a semi-solid forming hypereutec
In the present study, Al-5.5Fe-4Cu-2Zn-0.4Mg-0.5Mn al oy samples were prepared by electromagnetic stirring and semi-solid forming processing, and then the effec
期刊
Inhomogeneity of microstructure and mechanical properties of a 500 mm diameter heavy section semi-co
For the large magnesium alloy ingot, there is a considerable difference in cooling rate of different parts in the ingot, which leads to non-uniform distribution
期刊
Using carbon isotope of soil CO2 this paper discussed the sources of soil CO2 in karst area, Guizhou Province, China. Oxidation-decomposition of organic matter,