论文部分内容阅读
本文简述了数据采集与补偿控制系统、数据处理系统及补偿控制切削试验效果。结果表明,采用该项误差补偿控制技术镗削加工同轴多层孔,同轴度误差<φ0.01mm,表面粗糙度Ra<1.25μm。图1幅。
This article briefly describes the data acquisition and compensation control system, data processing system and compensation control cutting test results. The results show that using the error compensation control technology boring and machining coaxial multi-layer hole, the coaxial error <φ0.01mm, the surface roughness Ra <1.25μm. Figure 1 picture.