Y9380齿轮倒角机使用几年后,在齿端倒角过程中,会出现工件齿形表面被严重擦伤的现象,影响了齿轮质量,甚至出废品。产生这种现象的主要原因是机床。下面介绍一种简单易行的解决方法。擦伤齿面的原因如下:在倒角过程中,工件10的安装如图所示,心轴9与齿形定位板6的平面成90°,倒角时每分度一个齿就定位撞击一次。使胎具11的定位转动轴8的槽口产生变形,并逐渐增大间隙,直接影响了工件齿向与齿形定 Y9380 gear chamfering machine use a few years later, the chamfering process in the tooth, there will be a serious abrasion of the workpiece tooth surface, affecting the quality of the gear, and even out of waste. The main reason for this phenomenon is the machine tool. Here’s a simple solution. The reason for scratching the tooth surface is as follows: During the chamfering process, the workpiece 10 is installed as shown, the mandrel 9 and the tooth-shaped positioning plate 6 plane 90 ° chamfering, . So that the positioning of the tire 11 rotating shaft 8 notch deformation, and gradually increase the gap, a direct impact on the workpiece toothed and toothed