An extensive research activity has been focused on the upper and lower limbs of humanoid robots. However, due to mechanical design difficulties and complex control of multi-body system, the torso of humanoid robot is somehow a neglected or simplified design part. In this paper, operation performance of a new waist-trunk system as torso for humanoid robots is presented through results of lab experimental tests. The proposed waist-trunk system is composed of two 3 DOFs (degrees of freedom) parallel manipulators, which are connected in a serial chain architecture. A prototype is built by using two prototypes of CaPaMan (Cassino Parallel Manipulator), which are convenient stiff architectures with easy-operation characteristics. Experimental tests are carried out with the aims to imitate lateral-bending and transverse-rotation movements of human torso. Operation performances like displacements, accelerations, and actuation torque are measured for a performance evaluation and design characterization of the used manipulator solution imitating human torso. Experimental test results are illustrated and discussed to show the practical operation feasibility of the proposed architecture and the operation characteristics of the built prototype. An extensive research activity has been focused on the upper and lower limbs of humanoid robots. However, due to mechanical design difficulties and complex control of multi-body system, the torso of humanoid robot is somehow a neglected or simplified design part. In this paper , operation performance of a new waist-trunk system as torso for humanoid robots is presented through results of lab experimental tests. The proposed waist-trunk system is composed of two DOFs (degrees of freedom) parallel manipulators, which are connected in a serial A prototype is built by using two prototypes of CaPaMan (Cassino Parallel Manipulator), which are convenient stiff architectures with easy-operation characteristics. Experimental tests are carried out with the aims to imitate lateral-bending and transverse-rotation movements of human torso. Operation performances like displacements, accelerations, and actuation torque are measured for a performance evaluation and design characte rization of the used manipulator solution imitating human torso. Experimental test results are illustrated and discussed to show the practical operation feasibility of the proposed architecture and the operation characteristics of the built prototype.