剪羊毛机切割付由动、定刀片组成。动刀片在一定压力下贴紧在定刀片上,以每分钟2400次的频率做高速往复运动,完成切割过程。由于具有四齿的动刀片相对十三齿的定刀片进行工作,每个齿进行剪切运动的次数比定刀片要多得多,因此,对其使用性能提出了更高要求。目前,国内外动刀片材料,大多采用1.5毫米厚的低合金工具钢或碳素工具钢(如 Cr06、X05、SKS8、T12等)冷轧钢带。刀片制造的 Shear cutting machine paid to move, set the blade. Movable blade in a fixed pressure under the fixed blade, the frequency of 2400 times per minute to do high-speed reciprocating motion, to complete the cutting process. Due to the fact that the moving blades with four teeth work on the fixed blades of the thirteen teeth, the number of shearing movements of each tooth is much more than that of the fixed blades, therefore, the higher performance requirements are put forward. At present, the domestic and foreign moving blade materials, mostly 1.5 mm thick low-alloy tool steel or carbon tool steel (such as Cr06, X05, SKS8, T12, etc.) cold-rolled strip. Blades made