近几年来,有些单位疏忽了对大修后机械的运转磨合和磨合后的二次拆检。因此加速了机械的磨损,有的甚至造成烧瓦、拉缸等严重事故,大大缩短机械的使用寿命,造成不应有的损失浪费。为此,我们认为,大修后的机械按规定进行磨合和二次拆检必须引起各部门的重视。有些人对大修后的机械进行足够时间的磨合不以为然,认为磨合不磨合对机械 In recent years, some units have neglected the secondary dismantling after the overhaul of the machinery and the running-in of the machinery. Thus accelerating the wear and tear of machinery, and some even cause burning bush, pulling cylinder and other serious accidents, greatly reducing the service life of machinery, resulting in undue loss and waste. To this end, we believe that overhaul of the machinery according to the provisions of the run-in and secondary demolition must draw the attention of all sectors. Some people overhaul the machinery enough time run-in with disagreement, that running out of alignment on the machinery