论文部分内容阅读
通常,电机定子经过嵌线、浸漆后,再压入机座内,因定子和其绕组无着力点,吊起时又要当心线圈被擦伤,因此很麻烦,本吊具采用三向均布的支杆,上、下相作用,在手动螺母夹紧力的作用下,三爪呈伞状伸开并张紧在定子中,螺母自动锁紧后即可起吊,其原理如图(只示出一个方向)。本吊具的特点:1.采用手动夹紧。手动夹紧可靠、方便和迅速(由于变纵向缩短为横向伸长)。2.更换不同长度的配套支杆或摩擦块,即可吊装不同定子的电机,适用性强、简便。
Usually, the stator of the motor passes through the embedding line, and after dipping the paint, it is pressed into the base again. Because the stator and its winding do not exert any force, the coil should be scratched when hoisting, so it is troublesome. Cloth strut, the role of the upper and lower phase, the role of the manual nut clamping force, the three claws umbrella stretched out and tensioned in the stator, the nut can be automatically locked after the lifting, the principle shown in Figure (only Show one direction). The characteristics of the spreader: 1. The use of manual clamping. Manual clamping is reliable, convenient and quick (due to variable longitudinal reduction for the lateral elongation). 2. Replace different lengths of supporting struts or friction blocks, you can lift the different stator motor, applicability, easy.