论文部分内容阅读
实用性的润滑剂试验主要建立在 FZG 齿轮测力器试验台的基础上,如表3所示,有时试验需要进行8到480个小时。因此,建议变速器制造者在开发变速箱润滑油时,除利用在开发发动机润滑油所得到实验室数据外,还需要采集实际运行试验数据,而且最好将现有的润滑剂试验如磨损试验、点蚀试验等加以验证并标准化,并开发新的通用的试验方法,如工作载荷循环试验等。
Practical lubricant tests are based on the FZG gear dynamometer test bench, as shown in Table 3, which sometimes takes between 8 and 480 hours. Therefore, it is recommended that when manufacturing gearbox lubricants, transmission manufacturers need to collect actual operating test data in addition to laboratory data obtained from the development of engine oils, and it is advisable to incorporate existing lubricant tests such as wear tests, Pitting test, etc. to verify and standardize, and the development of new common test methods, such as working load cycle test.